Simple Ways to Maintain Your Gas Hot Water System

image source: homerepair.about.com

A gas hot water system is considered the most energy efficient and reliable water heating system available nowadays. It is very reliable, but just like any other machine, it needs maintenance too. It is always good to have a professional one to do the maintenance for you. However, there are some simple things that any unskilled one can do to maintain a gas hot water system. These simple things will help you extend its life and also avoid those expensive repair cost.

Inspecting and Maintaining Your Gas Hot Water System

Contrary to what you may think, a hot water system is not that complex. It mainly consists of a water storage tank and a heating element. In a gas hot water system, there is a gas burner which is turned on periodically through a thermostat. One of its key components is a pilot burner which has to be on at all times. To repair jobs these vital parts, you may need a licensed and professional plumbers. But as a common homeowner having such system, you can do a regular inspection to help you ensure that it is always working as it should:

First, inspect the temperature setting. A hot water system has an ideal temperature range of 46-49 degrees Celsius. Most often, the temp is set much higher than that which is a waste of energy and contributes to its repair problems.

It is also important that you should visually inspect the burner. Temporarily increase the heat setting in order to force the burner to ignite. Then, look for soot and observe the color of the flame. If you notice that the flame is predominantly yellow or orange and/or there is a significant build up of soot, it is time to call a licensed plumber as these might be signs of trouble.

One of the extremely important parts of your gas hot water system is the temperature/pressure relief valve (TPRV). You should partially lift the lever and let it go at least once a year. Ideally, it should snap back down and there’s a gurgling sound of water draining back into the drain tube that you’ll hear.

As time passes by, there might be sediments that will collect at the bottom of the tank, leading to rust and corrosion. You can do a mini-flush at least once a year in order to minimize the buildup of sediment.

With those simple procedures mentioned above, you are able to maintain your gas hot water system without entailing any cost and as a result, will prolong the life span of your gas hot water system. Online plumbing supplies Australia

Instantaneous Hot Water System

image source: www.plumberstoday.com.au

You may be experiencing winter these days and you need a hot water for your bath. If there is no hot water supply, can you even dare to bathe in a cold winter shower? This is your problem if you do not have a hot water system. Boiling water on a stove takes a lot of time. Do you need hot water in an instant? Maybe you need an instantaneous gas hot water system. Plumbing maintenance in Australia

What is an Instantaneous Gas Hot Water System?
This system is also known as an instant gas hot water system, or alternatively a continuous flow gas hot water system. This can only heat water when it is needed.

How does it work?
It works by moving cold water through a special heat exchanger which ignites the gas burner, which then heats the water ready for use.

How fast?
It has different sizes and these are measured by the flow rate or the amount of water that goes through the system in liters per minutes.  Higher flow rates are fine for larger houses.  As a general rule, you’ll need a flow rate of around 24 liters per minute for a two bathroom household.

How does it look?
Instantaneous gas hot water systems have different sizes and are very small in design. It is easily mounted on an interior or exterior wall. It can also be placed in the interior part the cabinet or anywhere out of sight by visitors. There are restrictions on installing an instantaneous gas hot water system inside the home, so you’ll need to guarantee that your installer follows these closely.

What are its benefits?

1. You will never run out of hot water. Just be sure to never run out of gas to heat the water.
2. No need to panic about getting into the shower before all the hot water vanishes.Instantaneous gas hot water systems are cheaper and more efficient to run than their electric counterparts.
3. This hot water system is safer than any other hot water systems.
4. There is no storage tank so there is no risk of the tank leaking or exploding hotwater everywhere. You can also set the temperature of the water that comes out of different taps. 
5. You can lessen the heat of the water in the bathroom, and increase the heat of waterin the kitchen ready for your coffee.

Feel free to visit this website for more info about instantaneous gas hot water system: http://www.youplumbing.com.au.

Great Tips for Water Heater Overflows

 image source: structuretech1.com

Imagine waking up in the middle of the night soaked to the bone with water dripping or flowing from your water heater? This type of problem is best suited to be handled by an experienced and skilled team of plumbers. You Plumbing offer a 24/7 service with their respected team of professional plumbers all over Sydney and adjoining areas.

Overflowing of water heaters is caused in part by the fact that they generate heat and pressure during their operation. The unit also consist of an open flame or in some units a high voltage electrode. This, when it goes wrong can be the cause of concerns for the personal safety of the home owners. To lessen the possibility for reasons why the water heater overflows the assistance of the highly experienced plumbing crews from You Plumbing is available.

Some precautions to reduce the possibility of overflowing are reduce by troubleshooting for the cause of the overflow. When troubleshooting the gas valve must be turned off and if electrically supplied the power must be switched off. Turn off the cold water supply to prevent further water from entering the unit. Online plumbing supplies Australia

See if the leak can be detected visually. If the unit is leaking from the valve on the top side of the unit, then we know that the problem is caused by the pressure relief valve. It happens often that mineral deposits over time can be the cause of the leak. It could also be caused by high temperatures and pressure. The valve must be replaced.

Should the leak be detected from the cold or hot water pipes then rust or corrosion may bethe cause. Replace the pipes.

Water leaking from the area around the drain valve could be caused by a defective washer or mineral deposits from the water source.

Water leaking from a water heater is normally visible directly under the unit and may cause a sound when touching the hot unit. This could sound quite dangerous and immediate action is required.

Using the team from You Plumbing with their 24/7 service in Sydney can eliminate the problem fast and cost effectively.

What You Need to Know About Gas Hot Water System

In any household, hot water is considered both a necessity and a luxury. So, choosing the appropriate hot water system for your needs is a vital decision that you have to make. If you have gas available at your property, you might find it hard to go past a gas hot water system.  Here are important things that you need to know about gas hot water system.

About Gas Hot Water Systems

Basically, a gas hot water system is a type of hot water system that burns either natural gas or bottled LPG gas in order to heat water for use within the home. They can be installed inside or outside the home. But they need to be fueled when installed internally. Generally, this type of hot water systems is energy efficient. But they come in different star ratings. The higher the rating means the more energy efficient they are.

Types of Gas Hot Water Systems

The gas hot water systems have two main types: storage and instantaneous. A storage gas hot water system has water that is being heated by gas. Then, it is stored inside an insulated tank until it is ready for use. In an instantaneous gas hot water system, the water is being heated as it passes through the hot water system. In this type, the water is only being heated when it is actually required. So, it is more energy efficient compared to storage gas hot water systems.

Moreover, there’s a new product that’s available in the market right now, the condensing gas hot water systems. It captures the heat from the exhaust gas in a special condensing unit and then uses that heat to help heat the water. It is incredibly energy efficient.

Advantages of Gas Hot Water Systems

Gas hot water systems provide you several benefits. The main advantage is that they are very cost-effective option compared to other alternatives like electric hot water systems. In addition to that, it is environment friendly. It burns quite cleanly and produces fewer emissions. Plumbing company services Australia

In comparison to electric hot water system, gas hot water systems are also smaller and the gas is always available. The system is also capable of reheating water very quickly. Moreover, they are cheaper to install than other eco-friendly alternatives like solar hot water or heat pumps.